Using The Egg Bin; Removing The Meat Drawer And Cover - Whirlpool top freezer refrigerator Use And Care Manual

To reinstall shelf:
1.
Hold shelf at front and back.
Upper channel
2. Tilt front of shelf up to a 45" angle to track.
3. Insert both rear shelf slides into upper channel of track.
4. Lower front of shelf to a level position.
NOTE: Make sure both rear shelf slides are securely
Insert rear shelf
in the track before letting go of shelf.
slides into
of track.
Using the egg bin
The egg bin has three pieces -the lid, the egg carrier,
and the bin. Use the egg bin to hold one, two, or three
dozen eggs.
To hold one dozen eggs:
Place a dozen eggs into the egg carrier. Then place
the egg carrier into the bin and cover with the lid.
To hold two dozen eggs:
Place two dozen eggs loose in the bin and cover them
with the lid. Use the carrier to transport eggs between
the bin and your cooking area.
To hold three dozen eggs:
Place two dozen eggs loose in the bin. Invert the lid
and place it on the bin. Place a dozen eggs, in the
carton, on top of the lid. Use the carrier to transport
eggs between the bin and your cooking area.
Lid
-rier
Bin
Removing the meat drawer and cover
To remove the meat drawer:
1. Slide meat drawer out to the stop.
2. Lift front of meat drawer and slide meat drawer out
the rest of the way.
3. Replace in reverse order.
To adjust the cover position:
1. Tilt front of cover up.
2. Lift back of cover.
3. Pull cover straight out.
To replace the cover:
1. Guide the cover's rear hooks into the slots in the
shelf supports on cabinet wall.
2. Tilt cover up at front until the hooks drop into slots.
3. Lower front of cover to a level position.
Pull out to the stop, lift the front, and pull again.
10