Page 1
ASSEMBLY INSTRUCTIONS YOUR 7510 STATIONARY CRIB * READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP INSTRUCTIONS FOR FUTURE USE. * NEVER USE PLASTIC SHIPPING BAGS OR OTHER PLASTIC FILM AS MATTRESS COVERS BECAUSE T H E Y C A N C A U S E S U F F O C A T I O N .
Page 4
Please, refer to this number in each by placing the screw / bolt on the upper diagram which is drawn in actual the event that you need to call ROMINA size. Be sure to use the proper size and shape specified in the instructions.
Page 5
STEP 1 Take the f ixedsides of our crib ( S) attach them to the end panels (EP) using 8 bigger Allen bolts and 8 washers (10) Start the threads by hand to assure you don't strip the threads, then, use the suplied Allen wrench 4+10 Do not tighten the bolts completely at this...
Page 6
STEP 2 (Two adults are required to complete this step) Take our crib as resulted after completing STEP 1 and carefully lace it with one of the fixedsides (FS) on the floor , taking care not to scratch its finish. Then, using four bigger Allen bolts and 4 washers (10) attach the stabilizing bars to the end panels...
Page 7
STEP 3 (Two adults are required to complete this step) Take our crib as resulted after completing STEP 2 and carefully lace it with its feet on top, taking care not to scratch its finish. Then, using all the eight smaller Allen bolts , all the four dowels and all the four assembly tip...
Page 8
Wooden ornament mounting example: using a Phillips screwdriver (not supplied) or just the hand, insert a dowel into one crib’s foot (please see the assembly tip for dowel correct positioning); assembly tip attach the wooden ornament (WO) to the end panel (EP) inserting the dowel into the hole found on the smaller side...
Page 9
STEP 4 WARNING! TIGHTEN COMPLETELY! sing the supplied Allen wrench (1) you must tighten completely all the bigger Allen bolts (4+10) involved in stationary sides fixing, remained untighten from STEP 1 (see FIGURE 4 REMINDER 4+10 You have a total of Allen bolts, distributed as following: bigger bolts (4+10)
STEP 5 Assemble the mattress support using 4 bigger round head bolts "butterfly" type nuts smaller lock washers (11) and a Phillips screwdriver (not supplied). The lock washer must be attached to the bolt after the bolt passed through the frame and the metallic bracket of the mattress support and before attaching the nut.
Page 11
WARNING: TO KEEP YOUR BABY STEP 6 (Two adults are required to complete this step) SECURE AND SAFE, AND TO AVOID POTENTIAL INJURY OR DEATH, IT'S Take our crib as resulted after completing STEP 4 VERY IMPORTANT TIGHTEN carefully lace with one of the fixedsides (FS) on the COMPLETELY...
Page 12
TR 7510 T ( ODDLER AIL 7510 ASSEMBLY INSTRUCTIONS FOR TODDLER RAIL CAN BE FOUND INSIDE OF TR 7510 PACKAGE. PLEASE, CONTACT ROMINA FURNITURE OR YOUR LOCAL DISTRIBUTOR FOR MORE INFORMATION. NOTE: THE STYLE OF YOUR CRIB, M A T T R E S S S U P P O R T O R...
Page 14
Regular cleaning with mild soap on a soft cloth, followed by a clean damp cloth, then a dry cloth, will preserve the original luster and beauty of this fine finish of your Romina Furniture product. Thank you for beeing one of our distinguished clients.
Need help?
Do you have a question about the 7510 and is the answer not in the manual?
Questions and answers