Table of Contents
Advertisement
Network setting
Typical setting for network
The method of image transmission using a wireless card can be divided broadly into
three different types by the current working environment.
To use wireless communication for the first time
Insert the optional wireless card (ET-CDWL1) into your PC and make setting for the
direct wireless communication with the projector.
For details of setting the projector, refer to "Setting the projector" on page 82.
For details of setting the PC, refer to "Settings of personal computer" on page 90.
Personal computer
Typical setting
Parameters
IP address
Subnet mask
Mode
Channel
Note:
• It is also necessary to install the wireless card driver and to make settings for the
wireless card.
For details of installing the wireless card driver, refer to "Installing wireless card
driver" on page 85.
For details of setting the wireless card, refer to "Settings of wireless card" on page
89.
Setting of the projector
LAN 1 - 5:
192.168.10.10-14
(factory default)
If you use more than one
projector, assign a different
address to each of them.
255.255.255.0
(factory default)
AD HOC
11 (factory default)
Use the same setting as the
PC.
Projector
Setting of the PC
Assign an address such as
192.168.10.15 or 192.168.10.20.
The same IP address as the
projector cannot be used.
255.255.255.0
Ad Hoc
11
Use the same setting as the
projector.
E
-79
NGLISH
Advertisement
Table of Contents
