Table of Contents
Advertisement
Operating range of the remote control unit
Point the remote control unit toward the remote control signal receptor on the front or the rear of the projector to
operate the projector. Refer to the illustration below for the operating range of the remote control unit.
<Top view>
23.0 feet
(approx. 7 m)
Remote control
unit
<Side view>
23.0 feet
(approx. 7 m)
NOTE:
To operate the projector, the remote control unit should be held in front of the remote control signal receptor
within a distance of 23.0 feet (approximately 7 meters).
If strong light is allowed to shine onto the remote control signal receptor, or if there are any obstacles between
the remote control signal receptor and the remote control unit, correct remote control operation may not be
possible.
If facing the remote control unit toward the screen
The projector can also be operated by pointing the remote control unit toward the screen as shown in the
illustration below.
Screen
NOTE:
If facing the remote control unit toward the screen to operate the projector, the operating range of the remote
control unit will be limited by the amount of light reflection loss caused by the characteristics of the screen used.
Remote control
signal receptor
Remote control unit
Remote control
Projector
signal receptor
Projector
10
23.0 feet
(approx. 7 m)
Remote con-
trol unit
23.0 feet
(approx. 7 m)
Advertisement
Table of Contents
