Cab-1 Remote Controller Commands - Lionel Keystone Super Freight Owner's Manual

TrainMaster Command Control operations

CAB-1 Remote Controller commands

T he CAB-1 Remote Controller commands are detailed below. The corresponding
RailSounds sound system effects are in bold italic type.
Coupler release sound.
Releases the rear coupler.
Coupler release sound.
Activates the numeric keypad.
Toggles the headlight on and off.
Accelerates the locomotive with a clockwise rota-
tion. Decelerates the locomotive with a counter-
clockwise rotation. Speed-dependent chuffing
sounds. DynaChuff synchronized chuffing
effect.
Activates the locomotive's whistle. Release the but-
ton to discontinue the sound. Multiwhistle
steam whistle sound.
Toggles the bell sound on and off. Bell sound.
Changes the locomotive's direction. The locomotive
decelerates to a stop and continues in the opposite
direction when you increase the throttle. Air release sound.
Increases the locomotive's speed while the button is
pressed. Release the button to return to the initial
speed. Labored chuff.
Decreases the locomotive's speed while the button is pressed. Squealing brake
sounds.
Shuts down all PowerMasters on your railroad. Stops all TrainMaster Command
Control-equipped locomotives in operation. Use HALT only in emergency situations.
20
SET L M H
See page 22 for the
momentum settings