Sync Your Cameras With The Base Station - NETGEAR ARLO PRO User Manual

Sync Your Cameras With the Base Station

¾ To sync your cameras:
1. Bring the camera within one to three feet (30 –100 centimeters) of the base
station.
Note:
Cameras must be synced one at a time.
2. Press the Sync button on the top of the base station for about two seconds
and then release the button.
3. Wait for the Sync status LED to blink green.
4. Press the Sync button on top of the camera for about two seconds and then
release the button.
Set Up Your System
11