NETGEAR ARLO PRO User Manual page 10

Get an Account
¾ To set up an Arlo account:
1. Tap the Arlo icon
If you are using a computer, enter
browser.
If you are using a mobile device that supports Touch ID
enable Touch ID or skip.
2. To use Touch ID, tap Enable Touch ID.
If you tap Skip, you can turn on the Arlo app fingerprint ID login later. See
the Arlo App Fingerprint ID Login On and Off
3. Tap or click New System Setup.
4. Select Arlo (Wire-Free).
5. After the app discovers your device, select your base station's serial number
from the menu.
6. Select your time zone from the menu.
7. Tap or click Continue.
8. Complete the required fields for account setup.
9. Tap or click Continue.
10. Select a subscription plan.
Note: For more information, see
Your Arlo account is set up. The Basic subscription plan supports up to five synced
cameras. You can upgrade to a paid subscription plan to support more cameras.
Set Up Your System
on your mobile device.
arlo.netgear.com
Subscription Plans
10
in the address bar of a
, you are prompted to
®
on page 55.
on page 66.
Turn