Table of Contents
Advertisement
Resetting to the factory default settings
You can reset most of the customised settings
to the factory defaults by pressing DEFAULT
button of the Remote control. Display the
required sub menu or the menu items and
press the DEFAULT button again.
See "Main menu and Sub-menu" on page 30.
Projecting an image in INDEX-WINDOW mode
You can project an image in split 2 windows
as an INDEX-WINDOW, one is frozen, stored
in memory and displayed on the screen's left
side, while the display of subsequent images
continues on the right.
To escape from the INDEX-WINDOW, press
the RETURN button.
Projected image
Switching the position
In default, the frozen image is displayed on the left
and the subsequent image is displayed on the
right. Press I H to switch the position.
Frozen image
Continuing image
Continuing image
Frozen image
Continuing image
Frozen image
Remote control operation
NOTE:
• Some menu items are not available to reset by pressing
the DEFAULT button. Adjust each menu items
manually.
Changing the image size
Press F G to switch and cycle through in 3 size.
Frozen image
Continuing image
Capturing a new image
While in INDEX-WINDOW mode, press ENTER to
capture a new image and the frozen image window
will be updated in a while.
NOTE:
• If you change the window size, the aspect ratio of the
image is changed and becomes vertically elongated.
• This operation can also be carried out using the
INDEX-WINDOW command in the MAIN MENU.
See "INDEX-WINDOW" on page 38.
• When FUNCTION BUTTON is set to "INDEX
WINDOW" (see "FUNCTION BUTTON" on page 36),
the INDEX-WINDOW operation can also be carried out
by pressing the FUNCTION button at the front of the
projector.
E
NGLISH - 27
Advertisement
Table of Contents
