Televes RST 7229 User Instructions page 22

User instructions
Installation
Install the receiver
1.- Connect to LNB and Dish Via coaxial cable.
2.- Connect TV set to TV Scart Socket.
3.- Connect VCR, or Decoder to VCR, or Decoder Scart
socket.
7260
Decoder
Cautions
• To prevent electric shock, do not
remove covers.
• Do not cover the ventilation slots on
the cover of the receiver.
• Protect the receiver against heat
dust, humidity water and direct
expose to sunshine.
7260
VCR
Decoder
• Do not use any chemical detergents
for cleaning.
• For servicing, always contact a
specialist service shop.
• Do not operate it on a soft surface
(such as carpet)
22
Video level Adjust
1.- Adjust for proper picture brightness, by using a small
screw driver.
TV
7229
TV
•
It is strongly recommended not to
connect to the mains any equipment
before the installation is totally
finished.
7229
• Only connect the receiver to the AC
system and switch it on once all the
connections have been set up.
• In the event of a prolonged absen-
ce, pull out the mains plug to dis-
connect the receiver from the power
mains.
7229