Table of Contents
Advertisement
Using WebBrowser
Time settings
Click [Detailed set up] [Adjust clock] in the menu.
Time zone
Time
Email settings
You can specify two email recipients.
Click [Detailed set up] [E-mail set up] in the menu.
• [MAIL SERVER]
ENABLE
SMTP SERVER NAME
• [MAIL OPTION]
MAIL FROM
MEMO
• [TEMPERATURE WARNING SET UP]
MINIMUM TIME
INPUT AIR TEMPERATURE: Select the temperature of the intake
• [E-MAIL ADDRESS]
E-MAIL ADDRESS
MAIL CONTENTS
ERROR
LAMP RUNTIME
INPUT AIR TEMPERATURE: Select ON to send email when the
PERIODIC REPORT
When [SUBMIT] is clicked, the settings are applied.
(cont.)
: Select the time zone and click [Set
time zone].
: Enter the current date and time in
[Date] and [Time], and then click [Set
date and time].
: Enable or disable email transmission.
: Enter the SMTP server name.
: Enter the sender's email address.
: Enter a description of the sender.
: Enter the interval for sending email.
sensor at which to send a warning
message.
: Enter the email addresses of the
recipients.
: Change the type of message as
desired.
When sending messages to mobile
phones, select "SIMPLE."
: Select ON to send email when errors
occur.
: Select ON to send email when "at
REMAIN" is reached.
temperature set in [TEMPERATURE
WARNING SET UP] is exceeded.
: Send a message with the projector
status at the selected date and time.
40
Advertisement
Table of Contents
