Table of Contents
Advertisement
Network setting of the projector
Changing the network number
1
Select [WIRELESS LAN] at the network menu.
2
Select the number to be connected with the [
PT-FW100NT
PICTURE
POSITION
LANGUAGE
OPTION
SECURITY
NETWORK
RETURN
SELECT
ENTER
Selecting [DISABLE] disables the wireless LAN.
[User] settings
If you selected one of [USER1] to [USER3] for [WIRELESS LAN] at the network menu, you can make detailed network settings.
Confirm to your system administrator before changing any settings.
IP address settings
How to display IP address setting menu
Press [WIRELESS LAN] [USER1]-[USER3] [ENTER] at the network menu.
WIRELESS DETAILED SETUP
USER1
NAME CHANGE
DHCP
IP ADDRESS
SUBNETMASK
RETURN
GATEWAY
SELECT
ENTER
DHCP
※
:
ON : If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be
acquired.
OFF : If a DHCP server does not exist in the network to which the projector is connected, additionally set [IP
ADDRESS
※
], [SUBNETMASK
※ "Glossary" (See page 44)
A wired LAN and wireless LAN cannot be used in the same segment.
WIRED LAN
USER1
WIRELESS LAN
NAME CHANGE
OFF
INPUT PASSWORD
PASSWORD CHANGE
NETWORK STANDBY
OFF
WEB CONTROL
ON
OFF
LIVE MODE CUT IN
STATUS
INITIALIZE
1/3
USER1
OFF
192.168. 11.100
255.255.255.
0
192.168. 11. 1
NEXT
CANCEL
※
] and [GATEWAY
(cont.)
] buttons.
※
].
29
Advertisement
Table of Contents
