Network setting of the projector
Changing the network number
1
Select [WIRELESS LAN] at the network menu.
2
Select the number to be connected with the [
PT-FW100NT
PICTURE
POSITION
LANGUAGE
OPTION
SECURITY
NETWORK
RETURN
SELECT
ENTER
[User] settings
If you selected one of [USER1] to [USER3] for [WIRELESS LAN] at the network menu, you can make detailed network settings.
Confirm to your system administrator before changing any settings.
IP address settings
How to display IP address setting menu
Press [WIRELESS LAN]→[USER1] - [USER3]→[ENTER] at the network menu.
WIRELESS DETAILED SETUP
USER1
NAME CHANGE
DHCP
IP ADDRESS
SUBNETMASK
RETURN
GATEWAY
SELECT
ENTER
DHCP
:
※
ON: If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be
acquired.
OFF: If a DHCP server does not exist in the network to which the projector is connected, additionally set [IP ADDRESS
[SUBNETMASK
※ "Glossary" (See page 69)
WIRED LAN
USER1
WIRELESS LAN
NAME CHANGE
OFF
INPUT PASSWORD
PASSWORD CHANGE
NETWORK STANDBY
ON
WEB CONTROL
ON
ON
LIVE MODE CUT IN
STATUS
INITIALIZE
1/3
USER1
OFF
192.168. 11.100
255.255.255.
0
192.168. 11. 1
NEXT
CANCEL
※
] and [GATEWAY
※
].
(cont.)
] buttons.
53
],
※