Functional Description; Name Of Parts; Specifications - Hitachi GP 2S2 Instruction Manual

NOTE
The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance
of the power tool.
NEVER operate, or attempt any maintenance on the tool unless you have fi rst read and understood all safey
instructions contained in this manual.
Some illustrations in this Instruction Manual may show details or attachments that diff er from those on your own
power tool.

NAME OF PARTS

Collet chuck
Spindle

SPECIFICATIONS

Motor
Power Source
Current
Rated Speed
Max. Wheel Diam.
Collet Chuck Capacity
Weight (without cord)
WARNING
NEVER use an abrasive wheel, cutting wheel, or any wheel greater than 1" in diameter. Using such wheels
can result in wheel breakage, and will otherwise increase the risk of bodily injury from contact with the
wheel or wheel fragments.

FUNCTIONAL DESCRIPTION

Bearing lid (B)
Nose bracket
Single-Phase, Series Commutator Motor
Single-Phase, 120 V AC 60 Hz
4.7 A
29,000 / min
1" (25 mm)
1/4" (6.35 mm)
3.7 lbs (1.7 kg)
Switch
Tail cover
Housing
Inner cover (B)
Fig. 1
English
9