How To Read These Operating Instructions - Danfoss vlt hvac drive fc 102 Operating Instructions Manual

How to Read these Operating...
1 1

1 How to Read these Operating Instructions

Software version: 4.1x
This guide can be used with all FC
102 frequency converters with
version 4.1x or later.
The actual software version
number can be read from
15-43 Software Version.
This publication contains information proprietary to
Danfoss. By accepting and using this manual the user
agrees that the information contained herein is used solely
for operating equipment from Danfoss or equipment from
other vendors if such equipment is intended for communi-
cation with Danfoss equipment over a serial
communication link. This publication is protected under
the Copyright laws of Denmark and most other countries.
Danfoss does not warrant that a software program
produced according to the guidelines provided in this
manual functions properly in every physical, hardware or
software environment.
Although Danfoss has tested and reviewed the documen-
tation within this manual, Danfoss makes no warranty or
representation, neither expressed nor implied, with respect
to this documentation, including its quality, performance,
or fitness for a particular purpose.
In no event shall Danfoss be liable for direct, indirect,
special, incidental, or consequential damages arising out of
the use, or the inability to use information contained in
this manual, even if advised of the possibility of such
damages. In particular, Danfoss is not responsible for any
costs, including but not limited to those incurred as a
result of lost profits or revenue, loss or damage of
equipment, loss of computer programs, loss of data, the
costs to substitute these, or any claims by third parties.
Danfoss reserves the right to revise this publication at any
time and to make changes to its contents without prior
4
VLT HVAC Drive FC 102 Operating Instructions
VLT HVAC Drive
FC 100 Series
software
notice or any obligation to notify former or present users
of such revisions or changes.
•
VLT HVAC Drive Design Guide entails all technical
information about the frequency converter and
customer design and applications.
•
VLT HVAC Drive Programming Guide provides
information on how to programme and includes
complete parameter descriptions.
•
Application Note, Temperature Derating Guide
•
MCT 10 Set-up Software Operating Instructions
enables the user to configure the frequency
converter from a Windows
environment.
•
Danfoss VLT
www.danfoss.com/BusinessAreas/DrivesSolutions
then choose PC Software Download
•
VLT HVAC Drive BACnet, Operating Instructions
•
VLT HVAC Drive Metasys, Operating Instructions
•
VLT HVAC Drive FLN, Operating Instructions
Danfoss technical literature is available in print from local
Danfoss Sales Offices or online at:
www.danfoss.com/BusinessAreas/DrivesSolutions/Documen-
tations/Technical+Documentation.htm
The frequency converter complies with UL508C thermal
memory retention requirements. For more information,
refer to the section Motor Thermal Protection in the Design
Guide.
NOTICE
Imposed limitations on the output frequency
(due to export control regulations):
From software version 6.72 the output frequency of the
frequency converter is limited to 590 Hz. Software
versions 6x.xx also limit the maximum output frequency
to 590 Hz, but these versions cannot be flashed, i.e.
neither downgraded nor upgraded.
MG11F402 - Rev. 2013-12-16
™ based PC
®
Energy Box software at