Hpe Storeonce 2700 Backup System - HP StoreOnce 4700 Backup Service And Maintenance Manual

HPE StoreOnce 2700 Backup system

The HPE StoreOnce 2700 Backup system has 4 x 1 TB disks. It does not support connection of
an expansion shelf (Capacity Upgrade Kit).
Figure 23 Front view of the HPE StoreOnce 2700 Backup system
1. UID button
2. Power On button/LED
3. System Health LED
4. NIC status LED
5. Hot plug drives
The following figure illustrates the rear view of the appliance.
Figure 24 Rear view of the HPE StoreOnce 2700 Backup system
1.RAID controller
3. Power supply bay 1
5. iLO4 port, do not use for data connection
7. Video/monitor connector
9. 1 GbE network ports 2, 3 and 4
48 LEDs on StoreOnce Backup systems
Steady blue identifies the StoreOnce Backup system in the rack.
Flashing blue: remote management or firmware upgrade in progress
Steady green: Power connected, device ready to use
Flashing green: performing power on sequence
Steady amber: Device switched off or in hibernation with power connected
Steady blue: identifies the unit
Off: No power connected
Steady green: Hardware is performing correctly
Flashing amber: degraded condition
Flashing red: critical condition, such as power supply or fan failure
Off: no network connection or network not configured
Steady green: network connected
Flashing green: network activity
2. USB connectors (4)
4. Power supply bay 2 (optional)
6. Serial connector
8. 1 GbE network port 1, connect for Quick Install