Ilo4 Settings - HP StoreOnce 4700 Backup Service And Maintenance Manual

Table 8 RBSU settings
RBSU setting
Power Management
Options
PCI Device
Enable/Disable
Date and Time
Advanced Options
Change the BIOS Product ID, as shown in the following table.
Table 9 BIOS Product IDs
Model
HPE StoreOnce 4700 24TB Backup
HPE StoreOnce 4500 24TB Backup
HPE StoreOnce 2900 24TB Backup
HPE StoreOnce 2700 8TB Backup

iLO4 settings

Select the DNS/DHCP option and toggle DHCP Enable to OFF.
If DHCP is set to OFF, select NIC and TCP/IP and configure the network static IP addresses
Sub-setting Sub-sub-setting
HP Power Profile
HP Power Regulator
Embedded HP Smart Array P420i Controller
Service Options Serial Number
Service Options Product Id (ignore
warning displayed)
Thermal Configuration
iLO and BIOS configuration after replacing the motherboard
Current
Balanced Power and
Performance
HP Dynamic Power
Savings Mode
Enabled
Blank
Motherboard default
Optimal Cooling
BIOS Product ID number
690487–B21
690485–B21
775399-B21
690484–B21
Change to...
Maximum
Performance
HP Static High
Performance Mode
Disabled
Current Date and
Current Time
The serial number for
the HPE StoreOnce
Backup system
Appropriate BIOS
Product ID shown in
table below
Increased Cooling
23