Projector Body - Panasonic PT-AX200E Operating Instructions Manual

About Your Projector

Projector body

Top and front view
POWER
While the MAIN POWER is on,
switch between stand-by mode
and project mode. (page 19)
INPUT SELECT
Switch to cycle through the
input method. (page 21)
Air exhaust port
Heated air comes out of
this opening.
Remote control signal
receptor
Receive a signal from the
remote control. (page 22)
Projection lens
NOTE:
• Do not cover the ventilation openings or place anything within 50 cm (20") of them as this may cause damage or injury.
• While the projector is not in use, keep the lens cover to protect the lens.
E
12 - NGLISH
Control panel
MENU
Display the main menu.
Return to the previous menu.
(page 27)
Lens cover
Protects the projection lens
from dust or dirt.
POWER/LAMP/TEMP indicators
(page 19/page 40)
Luminance sensor
Senses the luminance for the
LIGHT HARMONIZER feature.
(page 31)
RETURN
Return to the previous menu.
(page 27)
Navigate through the menus with
F G H I, and activate the menu
item with ENTER. (page 27)
Focus ring
Adjust the focus of the image.
(page 21)
Zoom ring
Adjust the size of the image.
(page 21)
Air intake port
Shift lever
Adjust the position of the
projected image.
(page 16)