Switching The Input Signal; Assigning The Functions For Shortcut - Panasonic PT-AX200E Operating Instructions Manual

Remote control operation

Switching the input signal

You can switch the input method manually by pressing the INPUT SELECT button. Press the button
several times or press I H to cycle through the input methods as follows. The actual projected image
will be changed in a while.
The graphical guidance will be displayed on the upper
right of the projected image and you can confirm the
selected input method which is highlighted in yellow. See
"INPUT GUIDE" on page 38.
COMPONENT IN
COMPUTER IN
HDMI 1 IN
NOTE:
• If you select an unplugged input method, the guidance will blink on and off several times.
• See "List of compatible signals" on page 45.
• See "Connections" on page 18.

Assigning the functions for shortcut

You can assign the following menu options to the FUNCTION button for shortcut. See "FUNCTION BUTTON" on
page 37.
BLANK
SLEEP
FAVOURITE LOAD
LIGHT HARMONIZER
AUTO SETUP
HDMI 1 IN
HDMI 2 IN
COMPUTER IN
COMPONENT IN
E
26 - NGLISH
COMPONENT IN
S-VIDEO IN
VIDEO IN
HDMI 2 IN
COMPUTER IN
page 37
S-VIDEO IN
VIDEO IN
page 39
NORMAL
page 32
DYNAMIC
page 31
CINEMA1
page 36
CINEMA2
VIVID CINEMA
page 26
GAME
NATURAL
COMPONENT (YP
from the equipment connected to
COMPONENT IN.
S-VIDEO signal from the equipment
S-VIDEO IN
connected to S-VIDEO IN.
VIDEO signal from the equipment
VIDEO IN
connected to VIDEO IN.
HDMI 1 IN
HDMI signal from the equipment
connected to HDMI 1 IN/HDMI IN 2.
HDMI 2 IN
COMPUTER (RGB) signal from the
equipment connected to
COMPUTER IN.
P ) signals
B R
page 26
page 30