Connections; Before Connecting To The Projector; Connecting To Component In/Video In/S-Video In; Connecting To Computer In/Hdmi In - Panasonic PT-AX200E Operating Instructions Manual

Connections

Before connecting to the projector

Read and follow the operating and connecting instructions of each peripheral device.
The peripheral devices must be turned off.
Use cables that match each peripheral device to be connected.
Confirm the type of video signals. See "List of compatible signals" on page 45.
Audio cables must be connected from each peripheral device directly to the audio reproduction system.

Connecting to COMPONENT IN/VIDEO IN/S-VIDEO IN

\

Connecting to COMPUTER IN/HDMI IN

(RP-CDHG100: Optional))
NOTE:
• Make sure the HDMI cable is adapted to your HDMI device for proper performance.
• A compatible cable is required for an HDMI 1 080p signal.
• It is possible to connect with DVI devices via a HDMI/DVI conversion adapter, but some equipment may not project the
image properly or other problems could be encountered. "Serial terminal" on page 46
E
18 - NGLISH
To COMPONENT
HDMI cable
To HDMI output
DVD player
DVD player
video output
Video player
Computer
To S-VIDEO output
To VIDEO output
RGB signal cable
(Commercial item)