Lens Shift And Positioning - Panasonic PT-AX200E Operating Instructions Manual

Setting up

Lens shift and positioning

If the projector is not positioned right in front of the centre of the screen, you can adjust the projected image position
by moving the lens shift dials within the shift range of the lens.
Adjusting the lens shift lever
1. Screw the shift lever counterclockwise to unlock.
2. Move the shift lever to adjust the projected image position.
3. Screw the shift lever clockwise to lock.
Horizontal shift
You can place the projector where the projector lens is up to 25% horizontally off-centre from the screen and
then adjust the image position with the lens shift feature.
Up to about 25 % of
the projection
Up to about 25 %
of the projection
Vertical shift
You can place the projector where the projector lens is up to 63% vertically off-centre from the screen and the
adjust the image position with the lens shift feature.
Up to about 63 %
of the projection
Up to about 63 %
of the projection
E
16 - NGLISH
Screen
Shifting the lever left:
Moving to screen's right
Shifting the lever right:
Moving to screen's left
Shifting the lever down:
Moving to screen's bottom.
Shifting the lever up:
Moving to screen's top.