Performing Diagnostics - Honeywell ADEMCO 6271 Series Installation And Setup Manual

SCREEN

Performing Diagnostics

Select any diagnostic test from the Diagnostics screen by pressing its
associated Test button. All or any individual test may be run when
you access the Diagnostics screen; however, each test must be
performed one at a time.
At any time when a test is not being performed, you can press:
•
the back button to return to the previous screen, or
•
the home button to return to your home page.
SECTION 7: Troubleshooting
ACTION
5. Enter your 4-digit Installer code. The
"Advanced Setup" menu screen is
displayed.
6. Press the Keypad Test button on the
"Advanced Setup" menu screen. The
"Diagnostics" screen is displayed.
7–3