Setting Operating Modes; Language Selection - Honeywell ADEMCO 6271 Series Installation And Setup Manual

TouchCenter Installation and Setup Guide

Setting Operating Modes

Operating modes allow you to turn the TouchCenter chime mode on
or off. Additionally, when using the 6271V and 6271CV you may also
turn the voice mode on or off. The operating modes provide the
following features:
• Chime Mode – When selected, a request is sent to the alarm panel
requesting that the panel chime the TouchCenter whenever a
change in zone status occurs.
• Voice Mode (6271V and 6271CV Only) – When selected, a request
is sent to the alarm panel requesting that the panel initiate
TouchCenter voice annunciation whenever a change in system
status occurs such as Armed, Disarmed, or Alarms.
• Voice Chime Mode (6271V and 6271CV Only) – The chime mode
and voice mode are in effect. When selected, you will get the chime
beeps followed by voice annunciation.

Language Selection

The 6271C, 6271CS, and 6271CB allows you to select from three
different languages, (English, French and Spanish) with the default
being English.
4–22
11. On the "Time and Date" screen, press
the Apply button. A confirmation screen
is displayed.
12. Press the Yes button to save the time
changes in your security system or press
the No button to have the changes affect
the TouchCenter only.
Note: A Yes response is recommended.