How To Adjust The Contrast; How To Adjust The Volume; How To Select Screen Backlight Off Activation Time - Honeywell ADEMCO 6271 Series Installation And Setup Manual

TouchCenter Installation and Setup Guide

How to Adjust the Contrast

You may adjust the contrast as follows:
To increase contrast, move the slide bar above the current contrast setting.
To decrease contrast, move the slide bar below the current contrast setting.
If you have made any changes in the contrast settings, when you exit
this screen you will be presented with a pop-up asking if you want to
remember the new settings.
CONTRAST
SLIDE BAR
INDICATOR
VOLUME
SLIDE BAR
INDICATOR
Contrast and Volume Control

How to Adjust the Volume

You may adjust the sounder volume by pressing your finger on the
slide bar associated with the "Volume" scale and doing the following:
To increase volume move the slide bar above the current volume
setting.
To decrease volume move the slide bar below the current volume
setting.
If you have made any changes in the volume settings, when you exit
this screen you will be presented with a pop-up asking if you want to
remember the new settings.

How to Select Screen Backlight Off Activation Time

When the TouchCenter is not active, it will automatically turn the
backlight off after the selected backlight off time has expired (unless
"Never" option is selected). To select the screen backlight time, do the
following:
4–14