Routine Care - Honeywell ADEMCO 6271 Series Installation And Setup Manual

TouchCenter Installation and Setup Guide
SCREEN

Routine Care

•
Treat the components of the security system as you would any
other electrical equipment. Do not slam sensor-protected doors or
windows.
•
Keep dust from accumulating on the keypad and all protective
sensors, particularly on motion sensors and smoke detectors.
•
The keypad case and sensors should be carefully dusted with a
dry soft cloth. Do not spray water or any other fluid on the
units.
6–2
ACTION
4. Press the CLEAN SCREEN button. A
pop-up window displaying "Touch Screen
will be disabled so that you may wipe
the screen clean. Please use a damp,
soft cloth. DO NOT use any liquids,
sprays, or ammonia-based cleansers.
Press CONTINUE to disable
touchscreen.
When the Continue button is pressed the
"Touch Screen Disabled for => 30
Seconds". During these 30 seconds the
touch screen should be wiped clean of
fingerprints using a mild soap solution and
a soft cloth. When the counter reaches
zero, the window automatically closes and
the touch screen is active.
Note: Do not spray cleaning agent directly
on the screen, spray it on cloth then wipe
surface area.