Table of Contents
Advertisement
Trouble Shooting
The lid will not close
properly.
The lid cannot be
opened.
E1 is displayed on the
screen.
E2 is displayed on the
screen.
E3 is displayed on the
screen.
Helpline No. UK/Northern Ireland 0345 467
Rep. Ireland 07688 886
6743
262
Web Support:
Model Number: KY-
customerservice@sensiohome.com
318
Problem
The sealing ring
assembly has not
been fitted correctly.
The pressure has not
been fully released.
The pressure safety valve
is in the upright position.
Open circuit of the
sensor.
Short circuit of the
sensor.
The unit has overheated.
Reason
Remove the inner steel
plate by pulling on
the metal peg and
re-assemble correctly.
Allow the pressure to
release naturally, or turn
the Steam Release Valve
to the "exhaust" setting.
Use a cocktail stick to
push it down, jiggle the
lid and allow the air to
escape.The lid should
now open.
Unplug the unit and
allow to sit for
20 minutes.
Ensure the cooking pot
is correctly positioned
inside; it must have
direct contact with the
heating plate.Wipe the
base with a soft cloth.
Ensure the lid is off
during searing and
sautéing. Switch off and
cool down before
continuing.
22
Solution
Hide quick links:
Advertisement
Table of Contents
