Replacing The Battery - oticon IIc Instructions For Use Manual

replacing the battery

The correct battery size depends on the instrument type. Please find the battery size in
the instrument overview in the first section of this document.
A worn out battery should be removed immediately and disposed of according to local
regulations.
You will hear 2 beeps when it is time to replace the battery. This pre-warning will be
repeated in moderate intervals until the battery runs out. If the battery runs out the
instrument turns off. When that happens, 4 beeps are played to indicate that the
instrument is no longer operating.
Any moisture on the battery surface should be wiped off before use.
The magnet at the end of the MultiTool may be useful in
terms of helping you with the handling of the batteries.
MultiTool
16
To replace the battery, follow these instructions:
1. Fully open the battery
door. Remove the old
battery.
2. Remove the sticky label,
from the new battery.
3. Place the new battery in
the battery drawer. Ensure
that the + marking faces
the + on the battery door.
4. Close the battery door.
5. When the battery door is
closed, the instrument will
play a jingle. It might take
a few seconds before the
battery works.
17