Replacing Prowax Sound Outlet Filter - oticon IIc Instructions For Use Manual

replacing proWax sound outlet filter

1. Remove the tool from the shell. The tool has two arms, one for removal of the ProWax
(A) and one with the new ProWax (B).
2. Push the empty removal arm into the existing ProWax filter.
3. Remove the tool and the used filter. If the filter does not come out with a straight pull,
try to tilt the tool a bit when pulling it out.
4. Using the other arm, insert the new ProWax filter into the outlet.
5. Remove the tool so that it leaves the new ProWax filter in the instrument.
6. Throw out the used tool.
40
1
B
a
4
41
2 3
5 6