Replacing The Battery - oticon miniBTE Alta Instructions For Use Manual

replacing the battery

Your hearing instrument battery size is 312.
A worn out battery should be removed immediately and
disposed of according to local regulations.
You will hear 2 beeps when it is time to replace the battery.
This pre-warning will be repeated in moderate intervals until
the battery runs out. The battery may run out shortly after a
pre-warning or within the next couple of hours depending
on battery capabilities and individual hearing losses.
If the battery runs out, the instrument turns off.
When that happens, 4 beeps are played to indicate that the
instrument is no longer operating.
Replace the battery.
20
To replace the battery, follow these instructions:
• Open the battery door completely by pushing the raised edge at the bottom of the
instrument. Remove the old battery. The magnet at the end of the MultiTool may be
useful in helping you with the handling of the batteries.
• Remove the sticky label from the + side of the new battery.
• The new battery may be inserted by using the magnetic end of the MultiTool.
Ensure that the positive (+) marking faces the positive (+) sign printed on the battery
door. Close the battery door.
Any moisture on the battery surface should be wiped
off before use.
When you replace battery, it will take a few seconds
before the battery works.
MultiTool
21