replacing o-cap microphone filter
(Instruments with size 312 and 13 batteries)
1. Remove the tool from its packaging. The tool has two ends, one for removal of the
O-Cap (A) and one with the new O-Cap (B).
2. Push the removal end of the tool into the used O-Cap filter.
3. Pull the used O-Cap out with the tool.
4. Using the other end of the tool (1), push the new O-Cap into the inlet (2).
5. Remove the tool leaving the O-Cap in place (1). Throw out the handle (2).
If your instrument have two microphone inlets, follow the same procedure to replace also
the second O-Cap filter.
44
1
O-Cap
B
a
Handle
3
2
4
5
1
2
1
45
2