Replacing The Battery - oticon ALFA Instructions For Use Manual

replacing the battery

The correct battery size appears in the instrument overview in the first section of this
document. Batteries perform differently. Ask your Hearing Care Professional for help
choosing a high quality battery for your hearing instrument.
A worn out battery should be removed immediately and disposed according to local
regulations.
You will hear 2 beeps when it is time to replace the battery.
This pre-warning will be repeated in moderate intervals until the
battery runs out. The battery may run out shortly after a pre-warning
or within the next couple of hours depending on battery capabilities
and individual hearing losses.
If the battery runs out the instrument turns off. When that happens,
4 beeps are played to indicate that the instrument is no longer
operating.
Replace the battery.
16
To replace the battery, follow these instructions:
• Open the battery door with your fingernail and remove the old battery. The magnet
at the end of the MultiTool may be useful in helping you with the handling of the
batteries.
• Remove the sticky label from the + side of the new battery.
• The new battery may be inserted by using the magnetic end of the MultiTool.
Ensure that the positive (+) marking faces the positive (+) sign printed on the battery
door. Close the battery door.
If any moisture is on the battery surface, it should be
wiped off before use.
When you replace the battery, it will take a few
seconds before the battery works.
MultiTool
17