Panasonic PT-DW100E Operating Instructions Manual page 61

Press ◄► to adjust the
3.
correction amount.
• The value changes from -127 to 127.
Press ▲▼ to select "SUB
4.
KEYSTONE" or "LINEARITY".
Press ◄► to adjust the
5.
correction amount.
• The value changes from -127 to 127.
Note
• Adjust the "SUB KEYSTONE" or "LINEARITY" after
adjusting the "KEYSTONE".
The variable range of the "SUB KEYSTONE" or
"LINEARITY" changes in response to the adjusted
value of the "KEYSTONE".
• "SUB KEYSTONE" is a function which is used to
correct keystone distortion when the lens has been
shifted to the left or right. Keystone correction can
only be carried out for the area at the top-right of
the screen. However, this adjustment cannot be
used when "KEYSTONE" is set to "0".
• Pressing DEFAULT of the remote control will
restore the factory default ("KEYSTONE": 0, "SUB
KEYSTONE": 0, "LINEARITY": 0).
• The adjusted value is reflected in other input
signals.
• Keystone distortion can be corrected to ±40° of
the angle of tilt for the projector against the screen.
(The range for the angle of elevation is within ±22°
when using a lens with a fixed focal point, and it is
within ±28° when using an LE6 lens.)
• If keystone correction is used, edge blending
adjustment cannot be performed properly.
ENGLISH – 61