Installation Dimensions Diagram - Panasonic PT-DW100E Operating Instructions Manual

Installation (continued)

Installation dimensions diagram

Figure 1 : Dimensions applying when
one unit is used
Exhaust
Attention
• Leave a space of 50 cm or more behind the projector for replacing the lamp and ensuring the air exhaust vents
are not blocked.
• Set up the projector so that air can flow freely around the rear of the projector without staying still. In addition,
leave a space of 30 cm or more at the sides so that the hot air coming out from the air outlet vents does not get
drawn in through the air intake vents.
• Set up the projector with a space of 40 cm or more at the front so that the air filter can be replaced.
• When the projector is to be placed inside a box and used, ensure the structure has a duct or the like to
discharge air from the box, leave the clearances shown in Fig. 2, and ensure the temperature during operation
remains within the 0 ° C to 35 ° C range.
24 – ENGLISH
Figure 2 : Dimensions applying when
50 cm or 50 cm or
more more
Exhaust
Exhaust
40 cm or
more
two units are used)
50 cm 50 cm
50 cm 50 cm
or more or more
or more or more
50 cm 50 cm
40 cm 40 cm
or more or more
or more or more
10 cm or more 10 cm or more
Figure 3 : Set rotation direction
+15° +15°
+15° +15°
FILTER
CLEANING
+15° +15°
+15° +15°
OPEN
CLOSE