Specifications - Panasonic PT-DW100E Operating Instructions Manual

Specifications

Model No.
Power supply
Power consumption
Amps
Panel size
®
DLP Chip Display system
Number of pixels
Lens
(Powered zoom/
Powered focus control)
Projection lamp
*1
Optical output
For video signal
(S-video included)
For RGB signal
For DVI-D signal
Applicable
scanning
frequency
For YP
Colour system
Screen size
Screen aspect ratio
Projection scheme
Contrast ratio
(full white/full black)
Input module
connection slot
Interface
ports
RGB1 input
terminal
118 – ENGLISH
480p, 576p, 720/60p, 720/59.94p,
720/50p, 1 080/60p, 1 080/59.94p,
1 080/50p, 1 080/60i, 1 080/59.94i,
1 080/50i, 1 080/24sF, 1 080/23.98sF,
1 080/30p, 1 080/29.97p, 1 080/25p,
1 080/24p, 1 080/23.98p
[480i]
[480p]
[576i]
[576p]
[720/50p]
[720/60p]
[1 035/60i]
[1 080/60i]
P signal
B R
[1 080/50i]
[1 080/24p]
[1 080/30p]
[1 080/25p]
[1 080/24sF] horizontally 27 kHz, vertically 48 Hz
[1 080/60p]
[1 080/50p]
• HD/SYNC, VD terminals are not compliant with 3 value composite SYNC.
7 standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM/PAL60)
Menu-selectable from front/rear/ceiling mount, and floor mounting
1 set, BNC × 5
[For YP
B
Y: 1.0 V[p-p] synchronization signal included, P
[For RGB input]
0.7 V[p-p] 75 Ω For G-SYNC: 1.0 V [p-p] 75 Ω
HD/SYNC: 75 Ω, 1.4–5 Vp-p, positive/negative polarity automatically adjusted
VD: 75 Ω, 1.4–5 Vp-p, positive/negative polarity automatically adjusted
PT-DW100E
220 V – 240 V, 50 Hz/60 Hz
1 500 W (about 15 W in standby)
0.85 inch (aspect ratio 16:9)
Three-unit DLP
3 × 1 049 088 pixels (1 366 × 768 dots)
4 bulbs × 300 W UHM lamp
10 000 lm (ANSI)
Horizontally 15.75 kHz/15.63 kHz, vertically 60 Hz/50 Hz
Horizontally 15 kHz–100 kHz, vertically 24 Hz–120 Hz,
Panasonic Intelligent Auto Scanning (PIAS) system
Dot clock frequency 20 MHz–162 MHz
horizontally 15.73 kHz, vertically 59.94 Hz
horizontally 31.5 kHz, vertically 59.94 Hz
horizontally 15.63 kHz, vertically 50 Hz
horizontally 31.25 kHz, vertically 50 Hz
horizontally 37.5 kHz, vertically 50 Hz
horizontally 45 kHz, vertically 60 Hz
horizontally 33.75 kHz, vertically 60 Hz
horizontally 33.75 kHz, vertically 60 Hz
horizontally 28.13 kHz, vertically 50 Hz
horizontally 27 kHz, vertically 24 Hz
horizontally 33.75 kHz, vertically 30 Hz
horizontally 28.13 kHz, vertically 25 Hz
horizontally 67.5 kHz, vertically 60 Hz
horizontally 56.25 kHz, vertically 50 Hz
70 inch–600 inch
5 000:1 (when "DYNAMIC IRIS" has been set to "3")
One system
P input]
R
9.5 A
® ®
chip, DLP type
Option
Displayable resolution : VGA-WUXGA
Dot clock frequency : 25 MHz-162 MHz
• The WUXGA signals support only VESA
CVT-RB (Reduced Blanking) signals.
*2
16:9
P : 0.7 V [p-p] 75 Ω
B R
(non-interlace)