Package Contents; Description (Fig. 1); Electrical Safety - DeWalt DCS575 Original Instructions Manual

Hide thumbs Also See for DCS575:
Table of Contents

Advertisement

English
Charge D
WALT battery packs only with
e
designated D
WALT chargers. Charging
e
battery packs other than the designated
D
WALT batteries with a D
e
charger may make them burst or lead to
other dangerous situations.
Do not incinerate the battery pack.
Use: Use without transportation cap, Wh
rating indicates 108 Wh (1 battery with
108 Wh).
Transport: Transport with built-in transport
cap, Wh rating indicates 3 x 36 Wh
(3 batteries of 36 Wh).

Package Contents

The package contains:
1 Circular saw
1 Circular saw blade
1 Blade wrench
1 Parallel fence
1 Dust extraction port
1 Charger (T models only)
1 Li-Ion battery pack (T1 model)
2 Li-Ion battery packs (T2 model)
3 Li-Ion battery packs (T3 model)
1 Instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred
during transport.
• Take the time to thoroughly read and
understand this manual prior to operation.

Description (Fig. 1)

WARNING: Never modify the power
tool or any part of it. Damage or personal
injury could result.
A. Trigger switch
B. Trigger switch lock-off button
C. Main handle
D. Blade lock
E. End cap
F. Auxiliary handle
G. Bevel adjustment lever
H. Bevel angle adjustment mechanism
I. LED worklight
J. Base plate
K. Lower blade guard
L. Blade clamping screw
20
M. Lower guard lever
N. Upper blade guard
O. Battery pack
WALT
e
P. Battery release button
Q. Date code
R. Rail adjuster (0° cutting)
S. Rail adjuster (1-45° bevel cutting)
T. Fuel gauge button (on battery pack)
INTENDED USE
These heavy-duty circular saws are designed for
professional wood cutting applications. Do not cut
metal, plastic, concrete, masonry or fiber cement
materials. DO NOT use water feed attachments
with this saw. DO NOT use abrasive wheels or
blades. DO NOT use under wet conditions or in the
presence of flammable liquids or gases.
These heavy-duty saws are professional power
tools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
• Young children and the infirm. This appliance
is not intended for use by young children or
infirm persons without supervision.
• This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities; lack of
experience, knowledge or skills unless they are
supervised by a person responsible for their
safety. Children should never be left alone with
this product.

Electrical Safety

The electric motor has been designed for one
voltage only. Always check that the battery pack
voltage corresponds to the voltage on the rating
plate. Also make sure that the voltage of your
charger corresponds to that of your mains.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D
WALT service organisation.
e
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in
the plug.
Your D
WALT charger is double insulated
e
in accordance with EN60335; therefore
no earth wire is required.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcs576

Table of Contents