Advertisement
Using Your Kambrook Blender
Before First Use
Before using your blender for the first
time, remove all packaging material
and promotional labels. Ensure
the blender is switched off at the
power outlet and the power cord is
unplugged.
Carefully unscrew and remove the
blending blade holder from the 700ml
cup (See Fig. 1).
Fig. 1
Carefully unscrew the grinding blade
holder from the 350ml cup (See Fig. 2).
Fig. 2
8
Wash the blending blade holder,
BlitzPro blending cups, reusable lids,
sports bottles and drinking lids in warm
soapy water with a soft cloth. Rinse
and dry thoroughly.
NOTE: Do not immerse the
grinding blade holder, motor
base, power cord or power plug
in water or any other liquid.
NOTE: Do not place any part
of the blender, including the
BlitzPro blending cups and
sports bottles in the dishwasher.
Dishwashers vary in the market
and some dishwashers may
have hot spots that may distort
the plastic.
NOTE: There are rubber seals
situated underneath the
blending blade, grinding blade,
reusable lids and sports drinking
lids to prevent leaking. In case
these seals come out, wash in
warm soapy water, rinse and
dry thoroughly. Correctly refit
the seals into the lid or inside the
blade holder before using.
The motor base can be wiped with
a damp cloth. Dry thoroughly after
cleaning.
Assembling and Using the
Blending Blade
Use the blending blade holder with
cups to blend vegetable or fruit
smoothies, icy drinks, soups and
dips.
1.
Place the motor base on a flat,
dry surface. Ensure that the
blender is switched off at the
power outlet and the power cord
is unplugged.
2. Put the ingredients to be blended
inside the chosen cup. Never
blend without adding liquid
content to the cups.
NOTE: Never blend without
adding liquid content when
using the BlitzPro blender and
blending blade.
NOTE: For a better blended
result, cut all vegetables and
fruits in smaller pieces.
NOTE: Do not use the BlitzPro
blender to crush only ice cubes.
Ice cubes can only be blended
with liquid in the cup using
the blending blade as per the
recipes in this book.
NOTE: Do not overfill the cups;
700ml maximum marking on the
larger cup and 350ml maximum
marking on the smaller cup.
NOTE: Do not put carbonated
drinks (coke, etc.) into the
blending cups or sports bottles
as it may cause the lids to pop
3.
Screw the blending blade holder
to the chosen cup by turning
the blade holder in a clockwise
direction. Make sure that the
blending blade holder is securely
tightened to the cup (See Fig. 3).
Fig. 3
4. With the ingredients inside and the
blending blade holder screwed
on, flip the cup so that the blade
holder is facing down (See Fig. 4).
Fig. 4
9
Advertisement
