Interface Box Connections - Bosch VG5-7230-CPT5 Operation Manual

AUTODOME IP starlight 7000 HD
2.
9.6

Interface Box Connections

The following figure is a detailed illustration of the In-ceiling Interface box.
Figure 9.36: In-ceiling Interface Box
1
2
3
4
The following table summarizes the pin connectors and their function:
No. Connector Pin 1
P103 Alarms In Alarm 3
P102 Alarms Out Alarm 1
P104 Analog Relay Relay N.O.
P101 24 VAC Line
Bosch Security Systems
Attach the lid to the Interface box:
Align the slots on the lid with the two posts at the rear of the Interface box.
Rotate the lid down.
Squeeze the ground clips, located at the front of the box, against the Interface box with
your fingers before closing the lid to ensure that the lid does not catch on the ground
clips.
Secure the lid to the Interface box by pushing the lid down until the clip on the lid
catches against the box.
Fiber Optics
Ethernet Video
Dome Power
Data In/Out
Pin 2
Alarm 4
Alarm 2
Relay
COM
Earth
5
6
7
8
Pin 3 Pin 4
Alarm 5 Alarm 6
Alarm 3 GND
Relay N.C. Earth
Neutral
Operation Manual
Installing the In-Ceiling Mount | en
Coax Video
[Not applicable for AUTODOME
7000 Series cameras.]
Alarm In
Analog In
Relay
Pin 5 Pin 6
Alarm 7 AGND
Alarm 1 Alarm 2
2016-07 | 1.0 | F.01U.283.679
59
Pin 7
Ground