Advertisement
I've read that the components used in this type of amplifier are really important. What is inside my Son of Yeti?
- We use a combination of parts custom-made for us to our specifications (power transformer, output
transformer, choke, high-temperature / low-ESR electrolytic capacitors) and those used in our British series
(1/2W carbon composition resistors, 1W carbon film resistors, TAD Mustard capacitors, high-voltage silver
mica capacitors, Belton tube sockets, and Alpha potentiometers, Cliff jacks). Finally, we occasionally use
NOS components from our vast surplus parts collection in locations they work well and complement the
voicing or enhance the performance of the amplifier.
I like to use rack-mounted multieffects units. What is the output level straight from the EFFECTS LOOP SEND jack, -10dB or
+4dB?
- While not exact, -10dB is a better approximation than +4dB. The actual output level will depend on your
settings, particularly the volume controls. +4dB is usually reserved for recording/P.A. equipment with
balanced connections.
17
Advertisement
