Table of Contents
Advertisement
3-2. Using the audio system
■
Display
Up to 12 characters can be displayed at a time.
If there are 13 characters or more, pressing and holding
or more will display the remaining characters.
A maximum of 24 characters can be displayed.
If
is pressed for 1 second or more again or has not been pressed for
6 seconds or more, the display will return to the first 12 characters.
Depending on the contents recorded, the characters may not be displayed
properly or may not be displayed at all.
■
Error messages
"CD CHECK": This indicates a problem either in the CD or inside the player.
The CD may be dirty, damaged or inserted up-side down.
"WAIT" or "PLEASE WAIT": Operation has stopped due to a high tempera-
■
Discs that can be used
Discs with the marks shown below can be used.
Playback may not be possible depending on the recording format or disc
features, or due to scratches, dirt or deterioration.
CDs with copy-protect features may not be used.
■
CD player protection feature
To protect the internal components, playback is automatically stopped when
a problem is detected while the CD player is being used.
■
If CDs are left inside the CD player or in the ejected position for
extended periods
CDs may be damaged and may not play properly.
■
Lens cleaners
Do not use lens cleaners. Doing so may damage the CD player.
194
ture inside the player. Wait for a while and then
press
or
dealer if the CD still cannot be played back.
for 1 second
. Contact your Toyota
Advertisement
Table of Contents
