Yamaha 2011 V Star XVS650AA Owner's Manual page 54

PERIODIC MAINTENANCE AND ADJUSTMENT
1. Inner oil filter element cover
2. Bolt
5. Remove the oil filter element and
O-ring.
7
1. Oil filter element
2. O-ring
6. Install a new oil filter element and
the O-ring.
TIP
Make sure that the O-ring is properly
seated.
7. Install the oil filter element covers
by installing the bolts, and then
tighten them to the specified
torque.
Tightening torque:
Oil filter element cover bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
8. Install the engine oil drain bolt and
its new gasket, and then tighten
the bolt to the specified torque.
Tightening torque:
Engine oil drain bolt:
43 Nm (4.3 m·kgf, 31 ft·lbf)
9. Refill with the specified amount of
the recommended oil, and then in-
stall and tighten the oil filler cap.
7-12
Recommended engine oil:
See page 9-1.
Oil quantity:
Without oil filter element replace-
ment:
2.60 L (2.75 US qt, 2.29 Imp.qt)
With oil filter element replacement:
2.80 L (2.96 US qt, 2.46 Imp.qt)
TIP
Be sure to wipe off spilled oil on any
parts after the engine and exhaust sys-
tem have cooled down.
NOTICE
G In order to prevent clutch slip-
page (since the engine oil also
lubricates the clutch), do not
mix any chemical additives. Do
not use oils with a diesel speci-
fication of "CD" or oils of a high-
er quality than specified. In
addition, do not use oils labeled
"ENERGY CONSERVING II" or
higher.
G
Make sure that no foreign mate-
rial enters the crankcase.
ECA11620