Multi-Function Display - Yamaha 2011 WR250X Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
The electrical circuit of the warning light
can be checked by turning the key to
"ON". The warning light should come
on for a few seconds, and then go off.
If the warning light does not come on
initially when the key is turned to "ON",
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.
NOTICE
4
Do not continue to operate the en-
gine if it is overheating.
TIP
G
For radiator-fan-equipped vehi-
cles, the radiator fan(s) automati-
cally switch on or off according to
the coolant temperature in the ra-
diator.
G
If the engine overheats, see page
7-41 for further instructions.
Engine trouble warning light "
This warning light comes on or flashes
if a problem is detected in the electrical
circuit monitoring the engine. If this oc-
curs, have a Yamaha dealer check the
self-diagnosis system. (See page 4-8
for an explanation of the self-diagnosis
device.)
The electrical circuit of the warning light
can be checked by turning the key to
"ON". The warning light should come
on for a few seconds, and then go off.
If the warning light does not come on
initially when the key is turned to "ON",
or if the warning light remains on, have
ECA10021
a Yamaha dealer check the electrical
circuit.
EAU11534
"

Multi-function display

Be sure to stop the vehicle before
making any setting changes to the
multi-function
settings while riding can distract the
operator and increase the risk of an
accident.
1. "RESET" button
2. "SELECT 1" button
3. "SELECT 2" button
4. Clock/stopwatch
5. Speedometer
6. Odometer/tripmeter/fuel reserve tripmeter
4-3
WARNING
display. Changing
1 2 3 4
6 5
EAU45286
EWA12312