Handlebar Switches - Yamaha 2011 WR250X Owner's Manual

2. Reset the distance-compensation
tripmeter to zero by pushing the
"RESET" button for at least two
seconds.
Resetting the distance-compensation
tripmeter in combination with the stop-
watch
1. Stop the stopwatch.
2. Reset the distance-compensation
tripmeter and the stopwatch to
zero by pushing the "RESET" but-
ton for at least two seconds.
Self-diagnosis device
This model is equipped with a self-diag-
nosis device for various electrical cir-
cuits.
If a problem is detected in any of those
circuits, the engine trouble warning light
will come on and the display will indi-
cate an error code.
If the display indicates any error codes,
note the code number, and then have a
Yamaha dealer check the vehicle.
INSTRUMENT AND CONTROL FUNCTIONS
1
1. Error code display
NOTICE
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.
4-8

Handlebar switches

Left
ECA11590
1. Dimmer switch "
2. Turn signal switch "
3. Horn switch " "
Right
1. Engine stop switch "
2. Start switch " "
EAU12348
1
2
4
3
/ "
/ "
1
2
/ "