Catalytic Converter; Seat - Yamaha 2011 WR250X Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Catalytic converter

This model is equipped with a catalytic
converter in the exhaust system.
WARNING
The exhaust system is hot after op-
eration. To prevent a fire hazard or
burns:
G Do not park the vehicle near
possible fire hazards such as
4
grass or other materials that
easily burn.
G
Park the vehicle in a place
where pedestrians or children
are not likely to touch the hot
exhaust system.
G
Make sure that the exhaust sys-
tem has cooled down before do-
ing any maintenance work.
G
Do not allow the engine to idle
more than a few minutes. Long
idling can cause a build-up of
heat.
EAU13433
NOTICE
Use only unleaded gasoline. The use
of leaded gasoline will cause unre-
EWA10862
pairable damage to the catalytic
converter.
ECA10701

Seat

To remove the seat
Remove the bolts, and then pull the
seat off.
1
1. Bolt
To install the seat
1. Fit the slot in the seat onto the pro-
4-13
jection on the fuel tank, and insert
the projection on the seat into the
seat holder as shown.
EAU46280