D-Link AirPlus DI-614+ Manual page 51

Troubleshooting
2. The wireless client cannot access the Internet in the Infrastructure
mode.
Default
Make sure the wireless client is associated and joined with the correct
router. To check this connection: Right-click on the Local Area
Connection icon in the taskbar> select View Available Wireless
Networks. The Connect to Wireless Network screen will appear.
Please make sure you have selected the correct available network, as
shown in the illustrations below.
Check that the IP Address assigned to the wireless adapter is within
the same IP Address range as the gateway. (Since the DI-614+ has
an IP Address of 192.168.0.1, wireless adapters must have an IP
Address in the same range, e.g., 192.168.0.x. Each device must have
a unique IP Address; no two devices may have the same IP Address.
The subnet mask must be the same for all the computers on the
network.) To check the IP Address assigned to the wireless adapter,
double-click on the Local Area Connection icon in the taskbar >
select the Support tab and the IP Address will be displayed. (Please
refer to Checking the IP Address in the Networking Basics section
of this manual.)
If it is necessary to assign a Static IP Address to the wireless adapter,
please refer to the appropriate section in Networking Basics. If you
are entering a DNS Server address you must also enter the Default
Gateway Address. (Remember that if you have a DHCP-capable
router, you will not need to assign a Static IP Address. See
Networking Basics: Assigning a Static IP Address.)
Default
51