D-Link AirPlus DI-614+ Manual page 24

Using the Configuration Menu
Home > DHCP
DHCP stands for Dynamic Host
Control Protocol. The DI-614+
has a built-in DHCP server. The
DHCP Server will automatically
assign an IP address to the
computers on the LAN/private
network. Be sure to set your
computers to be DHCP clients
by setting their TCP/IP settings
to "Obtain an IP Address
Automatically." When you turn
your computers on, they will
automatically load the proper
TCP/IP settings provided by the
DI-614+. The DHCP Server will
automatically allocate an unused
IP address from the IP address
pool to the requesting computer.
You must specify the starting and
ending address of the IP address
pool.
DHCP Server
Starting IP Address
Ending IP Address
Lease Time
Static DHCP
Name
MAC Address
DHCP Client
DHCP Clients List
Enable or disable the DHCP service.
The starting IP address for the DHCP server's IP assignment.
The ending IP address for the DHCP server's IP assignment.
The length of time for the DHCP lease.
Used to allow the DHCP server to assign the same IP adress to
a specific MAC address. Enter the name, IP address, and MAC
address into the fields. Select which DHCP client to clone.
The name to be used to reference the specific static DHCP
client.
The MAC address of the static DHCP client.
Drop down list of all currently connected DHCP clients.
Lists the DHCP clients connected to the DI-614+. Click Refresh
to update the list. The table will show the Host Name, IP Ad-
dress, and MAC Address of the DHCP client computer.
24