Installing the DI-614+ Section 3 of this Installation Guide will walk you through the installa- tion and configuration of the DI-614+ as a Wireless Router to allow you to access other 802.11b networked computers and the Internet. You must have at least the following to configure the DI-614+: - Internet Explorer 6.x or later...
Installing the DWL-650+ Turn on the computer D-Link AirPlus DWL-650+ Driver CD in the CD-ROM drive. The step-by-step instructions that follow are shown in Windows XP. The steps and screens are similar for the other Windows operating systems. The Installation Screen will appear.
Click Next Select No, I will restart my computer later Click Finish Shut down Insert the DWL-650+ Wireless Cardbus Adapter into the Cardbus Slot in your Laptop. Make sure to turn off the laptop computer. Locate the Cardbus slot on your laptop computer.
Built-in Antenna Used to wirelessly connect to 802.11b (AirPlus, Air) net- works. Power LED Lights to indicate that the DWL-650+ is properly inserted. Restart Note: Please do not remove the driver CD until the DWL-650+ installation is complete! When you restart your com- puter this Found New Hard- ware Wizard...
Click Continue Anyway finalize the installation (The D-Link driver software for this device is undergoing Windows Logo testing. Microsoft certification is pending.) For Windows 2000, this Signature Not Found appear after your computer restarts. Click to finalize...
To Your Network First, connect the power adapter to the receptor at the back panel of the DI-614+ and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation. 1.
Your Installation is Complete! After you’ve continued in Windows XP (or after the computer restarts in the other Windows operating systems), the D-Link AirPlus DWL- 650+ Configuration Utility will automatically start and the utility icon will appear in the bottom right hand corner of the desktop screen (systray).
Using The Setup Wizard for the DI-614+ Please follow the steps below to configure your Broadband connection settings. Open your Web browser and type “http://192.168.0.1” URL address box. Then press the Enter or Return key. The logon pop-up screen will appear. Type “admin”...
The Setup Wizard (continued) You will see the following screens Click Next Set up your new password. You have the option to establish a password. Click Next Choose your time zone from the drop down list. Click Next...
The Setup Wizard (continued) A this point, the setup wizard will try to auto-detect your Internet connection type. If you have a Dynamic or PPPoE connection, you will be brought to the corresponding page. Otherwise, you will see the following screen: Select one of these settings.
The Setup Wizard (continued) If your ISP requires a Static Address, and this option is selected, then this screen will appear: Enter the IP Address informa- tion in the appropriate fields as originally provided to you by your ISP. You will need to complete all the required fields.
The Setup Wizard (continued) Wireless Setup The default settings are: SSID = default Channel = 6 The DI-614+ will connect with the DWL-650+ right out of the box, using the default settings. If you choose to change the settings, make sure that the Encryption and SSID settings are the same for both the DI-614+ and any wireless...
Your Setup is Complete! Click Restart Click Close Test Internet Connection. You will be returned to the Home tab. Click to Exit Then relaunch your Web browser (i.e., Internet Explorer or Netscape Navigator), to link to your favorite Web site to test your Internet connection.
Microsoft Windows XP: Go to Start > right click on My Network Places > select Properties > Double-click on the Network Connection associated with the Ethernet adapter (i.e., D-Link DFE-530TX+). Click Internet Protocol (TCP/IP) Click Properties Select Obtain an IP address...
APPENDIX B For Windows XP, if you wish to use the DWL-650+ AirPlus Utility, please use the following steps. Click the XP Networking icon to access the Zero Configuration Wireless Settings Click Advanced Uncheck Use Windows to configure my wire- less network settings.
Troubleshooting Q1: I cannot connect to the DI-614+. A: Make sure that the SSID and the Encryption key (if any) on the DWL-650+ Cardbus Adapter is exactly the same as the SSID and the Encryption key (if any) on the DI- 614+.
You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.