D-Link AirPlus DI-614+ Manual page 32

Using the Configuration Menu
Advanced > Firewall (Continued)
Protocol
Select one of the following protocols: TCP, UDP, or ICMP.
Port Range
Enter in the port range of the TCP/UDP ports that you want the policy to apply to. If it is
only a single port that you want the policy applied to, then enter the port number in the
Start Port field and leave the End Port field blank. If you want to use all the ports, you
can leave the port range empty.
Schedule
Select Always, or choose From and enter the time period during which the virtual ser-
vice will be available
32