Setting An Indoor Unit Address (Main/Rmc) - Samsung AC035FCADEH/EU Service Manual

Setting an indoor unit address (MAIN/RMC)

4-1-3
1. Check whether power is supplied or not.
- When the indoor unit is not plugged in, there should be additional power supply in the indoor unit.
2. The panel(display ) should be connected to an indoor unit to receive option.
3. Before installing the indoor unit, assign an address to the indoor unit according to the air conditioning system plan.
4. Assign an indoor unit address by wireless remote controller.
-The initial indoor unit ADDRESS is set as "MAIN : 0, RMC : 0".
-Set Main and RMC Address only the setting is required.
-There is no need to assign the indoor unit Main Address if the outdoor unit is addressing automatically.
The indoor unit Main address will follow the outdoor unit's automatically.
-Assign 12 digit when setting the indoor unit address.
-No need to assign SEG4, 5, 8, 10 which are non applicable. Even though those segments are set, they will be ignored.
-If you set the applicable segments with numbers other than the indiciated, the initial setting will be maintained.
Option No. : 0AXXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1
Explanation PAGE
Indication Details Indication Details
Indication
and Details
0
Option SEG7
Explanation PAGE
Indication Details
Indication
and Details
1
Example) If you want to set as "MAIN : 3, CHANNEL : 1, RMC : B",
SEG1
0
SEG7
1
assign option codes except SEG 1, 7 which are page options.
Samsung Electronics
SEG2
MODE Setting Main address
Indication
0
A
1
SEG8
Setting RMC address
Indication
RESERVED 0
1
SEG2 SEG3
A 1
SEG8 SEG9
- 1
SEG3 SEG4
Details
No Main
RESERVED
address
Main address
setting mode
SEG9 SEG10
Details
No RMC address RESERVED
RMC address
setting mode
SEG4
-
SEG10
-
SEG5
The unit digit of
an indoor unit
Indication Details
RESERVED
0~3
SEG11
Group
Group address
channel(*16)
Indication Details Indication Details
RMC1 0~2 RMC2
SEG5 SEG6
- 3
SEG11 SEG12
1 B
SEG6
A single
digit
SEG12
0~F
4-4