Casio DT-940 Service Manual page 9

2. Load two new AA (LR6)-size alkaline batteries into the main
battery compartment, making sure that they face the directions
shown in the figure.
3. Attach the battery compartment cover to the Handheld Terminal
and slide the main battery compartment cover lock to the LOCK
position.
REMOVING THE ALKALINE BATTERIES
Remove the alkaline batteries following the loading procedure in reverse.
Be sure to turn the Handheld Terminal OFF before you do this.
2.3 LOADING AND REMOVING THE LITHIUM-ION BATTERY PACK
LOADING THE LITHIUM-ION BATTERY PACK
1. Slide the main battery compartment cover lock to the FREE
position and remove the cover.
2. Load a lithium-ion battery pack into the main battery compartment
in the direction shown in the figure.
Load the battery while sliding it in with the p mark on the
lithium-ion battery pack aligned with the q mark in the main
battery compartment.
3. Attach the battery compartment cover to the Handheld Terminal
and slide the main battery compartment cover lock to the LOCK
position.
REMOVING THE LITHIUM-ION BATTERY PACK
Remove the lithium-ion battery pack following the loading procedure in reverse.
Be sure to turn the Handheld Terminal OFF before you do this.
― 7 ―