Cleaning Method - Coway AP-3008FH Instructions Manual

CLEAnInG METhOD

- Always unplug the unit before cleaning it.
- Do not use detergents that contain organic solvents (solvent, thinner, etc), bleach,
chlorine, or abrasives.
Tips
- Do not place the unit into water or spray water onto it.
Cleaning Air Inlet and Outlet (every 2 months)
Clean the air inlet and outlet using a soft brush or vacuum cleaner.
∗ Take care that dust does not enter the air purifier.
Cleaning Particle Sensor (every 2 months)
1. Clean the air inlet and outlet of the pollution sensor using a soft brush or
vacuum cleaner.
∗ Take caution that dust does not enter the air purifier.
2. Open the pollution sensor cover on the right
side of the product. Use a damp cotton
swab and clean the lens, dust inlet, and
dust outlet. Use a dry cotton swab to
remove any remaining moisture.
∗ Without regular cleaning the performance
of the pollution sensor will deteriorate.
Cleaning front cover
Separate the front cover from the unit and remove any dust attached to the
surface with a soft cloth or brush. Use a damp cloth if the contamination is serious.
(However, do not use abrasives.)
Cleaning the Unit
Use a dry, soft cloth to clean the product body. Use a damp cloth if the
contamination is serious. (However, do not use abrasives.)
Air outlet
Air outlet
Dust outlet
▶
Dust inlet
Air inlet
Air inlet