Table of Contents
Advertisement
- Always unplug the unit before cleaning the filters.
- The Pre-filter is reusable by removing dust or cleaning it with water.
- If the Pre-filter is not cleaned for a long time, the product performance may deteriorate.
Tips
- The Non-woven fabric, Multifunctional, Deodorization and HEPA filters cannot be reused even when cleaned.
- Do not clean them with water.
Cleaning Pre-filter (every 2 - 4 weeks)
1. Turn the lock at the bottom of the product
counterclockwise using a coin or flat-head
screwdriver, pull the front cover forwards, and
then lift the cover upwards to separate it.
∗ Take caution that dust does not enter the air purifier.
2. Separate the first filter case from the product by pulling it forwards while
pressing the catches on both sides.
3. Separate the Pre-filter by pulling it to the right.
∗ To prevent dust from falling from the filter, remove the filter carefully.
4. Clean the filter with a vacuum cleaner or with water depending on the
level of contamination.
5. When the moisture has completely dried, install the Pre-filter by pushing it into the product
completely.
∗ Install the front cover onto the product.
▶
▶
▶
13
14
Hide quick links:
Advertisement
Table of Contents
